AVoverIP Visionary Solutions Wallplate HDMI Encoder

Wallplate HDMI Encoder


Wallplate Encoder

Spec Sheet


User Manual


  1. Duet Wallplate HDMI Encoder


  • A single Gigabit LAN Port for PoE Power, 4K UHD Video and Control
  • Secure Network Isolation – VLAN Tagging separates AV traffic on the corporate network
  • Easy installation in a wall, floor, or lectern
  • Mounts into standard Decora style wallplates
  • Easy Control Integration
  • Ultra-low Latency [ ~1 frame – visually lossless ]
  • Low bitrates
  • No fiber or 10 Gigabit switch required
  • Low-Cost network switches are used
  • Scalable / Unlimited Distribution
  • Any number and combination of inputs/outputs [in increments of one]
  • Standard network cabling [CAT5e/6]
  • Utilize existing network resources
  • Rapid deployment
  • Single network for AV and IT
  • Reduced operating costs

Visionary’s PoE 4K UHD over IP cinema quality, ultra-low latency [~1 frame – visually lossless ], encoders and decoders bypass the constraints of traditional switch matrix distribution systems by continuing to harness the flexibility and scalability of converged IP networks.
With the growing demand for 4K UHD video, professional AV designers and IT directors – in an increasingly converged AV/IT environment – have been using Visionary’s products as an alternative to conventional distribution systems.
Visionary’s PacketAV® AV over IP products can be deployed on any industry standard IP network.

They can be used on existing enterprise IP networks or a physically separate parallel network [private network] to offload traffic, using the same network protocols, methods, and devices but without intermingling of video traffic with data or voice; with equal ease of installation.

Specifications Wallplate Encoder
Video Codec JPEG2000 based visually lossless video compression algorithm
Audio Codec LPCM up to 8 Channels
Bit Rates 50 to 800 Mbps
Latency Ultra-low Latency (visually lossless video)

17ms @ 1080p60 & 4K60 4:2:0

33ms @ 4K30 4:4:4

Streaming Protocols IP, UDP, TCP, ICMP, IGMP
Copy Protection HDCP 2.2, AES-128 Encryption
Maximum Resolutions High Dynamic Range (HDR)

4K60 4:2:0 HDR 8 bit

4K30 4:4:4 HDR 8 bit

1080p60 4:4:4 HDR 12 bit

1080p30 4:4:4 HDR 12 bit

Input Signal Types (Encoder) 1x HDMI capable of receiving source input video formats up to 4K60 4:2:0
Input Signal Types HDMI Audio, Stereo Analogue

• 1 digital input de-embedded from HDMI

Output Signal Types HDMI Digital Audio (NLPCM pass-through), Analogue Stereo Audio

• 1 digital audio output via HDMI

Digital Formats Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio, DTS:X, LPCM up to 8 channels.
Analogue Formats Stereo 2-channel
Analog-To-Digital Conversion 24-bit 48 kHz
Digital-To-Analog Conversion 24-bit 48 kHz
DanteTM/AES67 24-bit 48 kHz
Analog Output Volume Adjustment -80 to +20 dB
LAN 8-pin RJ-45 connector, female; 100BASE-TX / 1000BASE-T

Ethernet port / PD port

POE (IEEE 802.3af )

HDMI INPUT (1) HDMI Type A connector, female; HDMI digital video/audio input
3.5mm Barrel

3.5mm Barrel

3.5mm Barrel

3.5mm Barrel

3.5mm Barrel

Analog Stereo Output (balanced)

Analog Stereo Output (unbalanced)

IR over IP Input

IR over IP Output

RS232 over IP

Power Consumption 12 W typical
Cooling Convection / no fan (no moving parts)
Temperature 32° to 104° F (0° to 40° C)
Humidity 10% to 90% RH (non-condensing)
Heat Dissipation 25 BTU/hr
Acoustic Noise 0 dBA
Dimensions Height: 4.07 in. (103.4 mm) Width: 3.61 in. (91.8 mm) Depth: 2 in. (50.6 mm)
Weight 1.0 lb (0.45 kg)
Compliance CE, FCC, C-tick, RoHS, WEEE