AVoverIP – Visionary Solutions PacketAV™ Series Dante™/AES67 POE+ Four Channel Class-D Network Audio Amplifier

PNA-D4 Four Channel Amplifier



Spec Sheet

User Manual



  1. PNA-D4 Four Channel Amplifier


  • 5W per channel – 8 ohms (20W Total)
  • Dante™/AES67 input
  • Powered via POE+
  • Suitable for industrial, commercial and Pro AV installations

PNA-D4 is the first product in Visionary’s new PacketAV™ line of network AV endpoints. It is a 4/8 Ohms per channel network amplifier with Dante™/ AES67 input that is powered via POE+, no external power supply required. It is a robust unit suitable for industrial, commercial and Pro AV installations. The unit is inherently a network device allowing it to deploy easily and enable precise control of your sound. Four independent channels can be sourced using any Dante™/AES67 audio on the network using Dante™ Controller software or other third party software. This unit is Class D to allow for efficient use of power.

 Specifications PNA-D4
Audio Input DanteTM audio via Ethernet
Output Power: 5W/ channel 8 Ohms (20W Total)
Minimum Total Load 2 Ohms
Frequency response (+0,-3dB,1W) 20Hz–20kHz

THD+N<0.1% @5W-8 Ohm load

THD+N<0.1% @5W-4 Ohm load

Signal to Noise ratio > 99dB
Standard Voltage Gain 25.2dB
Power Consumption 2 Watts Standby, 25 Watts Maximum
Input Connector RJ-45
Output Connector Euro Block
Power Supply Power Over Ethernet +
Cooling Convection (No fan)
Controls Dante™ Controller Software
LED Indicators Power, Dante™, Status
Construction Steel Chassis
Dimensions 109mm x 95mm x 29mm (WxDxH)
Add 20mm W for mount flange
Weight 0.4kg
Warranty Redirection 2 Years Parts and Labour
Plenum Rating UL2043