AVoverIP Visionary Solutions E4100 Encoder & D4100 Decoder
E4100 Encoder/D4100 Decoder
SKU:
E4100 Encoder
D4100 Decoder
WHAT’S IN THE BOX
- E4100 Encoder or D4100 Encoder
Features:
- Distribute 4K video over Gigabit Ethernet Network
- Ultra-low Latency (visually lossless video)
- HDMI 2.0 and HDCP 2.2 Compliant
- USB over IP (KVM) and RS232 over IP
- HDMI Loop Through
- Matrix and Built in Video Wall Functions
- Adjustable Video Bitrate
- Auto Video Scaler
- POE
Visionary Solutions 4K UHD over IP cinema quality, ultra‐low latency [~1 frame ‐ visually lossless] encoder and decoder bypass the constraints of traditional switch matrix distribution systems by harnessing the flexibility and scalability of converged IP networks.
With the growing demand for 4K UHD video, professional AV designers and IT directors–in an increasingly converged AV/IT environment–can use Visionary Solutions products as an alternative to conventional distribution systems.
Visionary’s PacketAV® products can be deployed on any industry standard IP network. They can be used on existing enterprise IP networks or on a physically separate parallel network [private network] to offload traffic, using the same network protocols, methods, and devices but without intermingling video traffic with data or voice, and with equal ease of installation.
An encoder is connected to an [HDMI] AV source signal [a camera, STB, media player, PC or server, BluRay player, or digital signage player, etc.]. The signal is converted into a packetized network stream that is compatible with off‐the‐shelf IGMP enabled Gigabit Ethernet (GbE) switches (Jumbo Frames enabled). Using an existing CAT 5/6 infrastructure, users can connect CAT 5/6 to any decoder anywhere on the same GbE network. The decoder takes the IP packets received over CAT 5/6 cables, converts them back into an HDMI signal connecting directly to a display, delivering visually lossless video along with USB over IP (KVM) and RS‐232 over IP controls. A signal from any encoder can be sent to any decoder on the same network. The signals can easily be controlled with our Vision Lite software to create different outputs on the display side, including video wall or matrix switching.
Specifications | E4100 Encoder | D4100 Decoder |
---|---|---|
Size | 123/147mm(w/Flange) x 132mm(L) x 40mm(h), 370g | |
Ethernet Port | POE, UTP/STP 1000Mbps (8K Jumbo Frame required) | |
Protocol | IP, UDP, TCP, ICMP, IGMP | |
HDMI Port | 19 pin type A female | |
RS232 Port | Phoenix Euro Block 3.81mm pitch ‐ 5 pins | |
DC Jack (Power) | 2.0/DC5V, 2A | |
Audio Jack (Line In/Out) | Phoenix Euro Block 3.81mm pitch ‐ 4 pins | |
USB Port | Type‐B USB2.0 | Type‐A USB2.0 |
LAN Bandwidth | 850Mbps max. for each source | |
Max. Supported Timing | 2160p 30Hz @60fps | |
Max. Distance | 120m (UTP) between 2 devices (Encoder/Decoder/Ethernet Switch) | |
Built‐in Output Scaler |
|
|
Latency | ~1 frame ~ 17ms at 60 fps, ~33m at 30fps |
|
Video Wall |
|
|
USB Redirection | KM over IP: dedicated for KVM application USB over IP: support any kind of USB HID devices | |
HDMI Audio Redirection | 2 Ch LPCM 8 Ch LPCM 5.1 Ch NLPCM 7.1 Ch NLPCM | |
HDMI Audio Extraction | 4 Ch LPCM (32KHz ~96KHz) | |
Stereo Audio Redirection | LINE IN (switch off HDMI audio) | LINE OUT |
RS232 Redirection | Transparent binary data transmission | |
HDMI 3D Support | HDMI 2.0 3D: TnB, SbS, F.P. | |
Compression Technology | Full Frame based visually lossless video compression algorithm | |
Certificate | CE/FCC | |
Compliance | HDMI 2.0/HDCP 2.24/RoHS | |
Operating Temperature | 0~70°C | |
Operating Humidity | 10~85% RH (no condensation) | |
Storage Temperature | ‐10~80°C | |
Storage Humidity | 5~95% RH (no condensation) |