AVoverIP Visionary Solutions E4200 Encoder and D4200 Decoder

E4200 Encoder and D4200 Decoder


E4200 Encoder

D4200 Decoder



  1. E4200 Encoder or D4200 Decoder


  • 4K UHD
  • POE
  • Ethernet Expansion Port (power connected devices with PoE pass-through)
  • Multiple Selectable Local Input Sources with HDMI Loop-through
  • USB-C Input/Output
  • Dynamically Optimised (Adaptive) Bit-rate Compression CODEC with Built-in AI
  • AES67/Dante™
  • Enterprise Level Security – AES Encryption, 802.1x, HTTPS, SSH
  • Independent Routing
  • Dynamic OSD Text Overlay Capabilities
  • Mass Configuration
  • LLDP Support
  • QoS Support
  • Control
  • GPIO – 2×2 I/O User Configurable
  • Ultra-low Latency (visually lossless video)
  • HDMI 2.0 & HDCP 2.2 Compliant
  • USB2.0 over IP (KVM) and RS232 over IP, IR over IP & CEC over IP
  • KVM Multi Display Roaming
  • Dante™ Audio Embedding and De-embedding with VLAN tagging
  • Built in Video Wall Functions
  • Auto Video Scaler
  • Seamless Fast Switching (tearing free and no black screen)

PacketAV® Duet has been nothing short of a paradigm shift for networked AV. True convergence; a single platform to support DanteTM/AES67 * and Video over IP. Building on their success and wide adoption, the next generation of PacketAV® Duet endpoints continue to provide powerful 4K UHD Video and DanteTM/AES67 * Audio – now over a single Gigabit Ethernet port, with USB-C connectivity and other enhanced features.
Visionary’s PoE 4K UHD over IP cinema quality, ultra-low latency [~1 frame – visually lossless ], encoders and decoders bypass the constraints of traditional switch matrix distribution systems by continuing to harness the flexibility and scalability of converged IP networks.
With the growing demand for 4K UHD video, professional AV designers and IT directors – in an increasingly converged AV/IT environment – have been using Visionary’s products as an alternative to conventional distribution systems.

Visionary’s PackeTV® and PacketAV® products can be deployed on any industry standard IP network. They can be used on existing enterprise IP networks or a physically separate parallel network [private network] to offload traffic, using the same network protocols, methods, and devices but without intermingling of video traffic with data or voice; with equal ease of installation.

* Upgradable with a separately purchased PacketAV DanteTM/AES67 Module

 Specifications E4200 Encoder (see spec sheet for full details) D4200 Decoder
Video Codec JPEG2000 based visually lossless video compression algorithm  
Audio Codec Dante™/AES67 (* Upgradable with a separately purchased PacketAV DanteTM/AES67 Module)  
Bit Ratyes 50 to 800 Mbps  
Size 146mm(w/Flange) x 175mm(L) x 28mm(h), 450g 146mm(w/Flange) x 180mm(L) x 28mm(h), 450g
Ethernet Port 1
8-pin RJ-45 connector, female; 100BASE-TX/1000BASE-T
Ethernet port/PD port
POE (IEEE 802.3at), POE+ Only required for LAN2 PSE
Ethernet Port 2 8-pin RJ-45 connector, female; 100BASE-TX/1000BASE-T
Ethernet port/PD port
POE (IEEE 802.3af)
Protocol IP, UDP, TCP, ICMP, IGMP  
HDMI Input 1 & 2 (Encoder) (2) HDMI Type A Connectors, female; HDMI digital video/audio inputs  
HDMI Outputs (Encoder loop-through & Decoder output) HDMI Type A connectors, female; HDMI digital video/audio inputs  
6 pin Euroblock 3.81mm pitch connector Shared GPIO / RS232 / IR ports  
Power Consumption 12W typical  
Audio Input Signal Types

HDMI Audio, Analogue Stereo. Dante™/AES67 Network Audio (up to 4 channels)

  • 1 analogue stereo input, unbalanced or balanced
  • 1 digital input de-embedded from HDMI
HDMI Digital Audio (NLPCM pass-through), Analogue Stereo Audio, Dante™/AES67 Network Audio (up to 4 channels)
1 digital audio output via HDMI
1 analogue stereo input, balanced output
1 Dante™/AES67 digital output (up to 4 channels)
Digital Formats Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio, DTS:X, LCPM up to 8 channels  
Analogue Formats Stereo 2-channel  
USB-C Encoder Input: (1) USB Type C female Decoder Output: USB Type C female
LAN Bandwidth 850Mbps max. for each source  
Max. Supported Timing 2160p 30Hz @60fps  
Max. Distance 120m (UTP) between 2 devices (Encoder/Decoder/Ethernet Switch)  
Built‐in Output Scaler  

Supports wide range of resolutions and rates, up to 4K in/1080P out, 1080P in /4K out, image rotation, and video wall up to 16×16

Integrated scaling helps optimise quality and switching performance


Ultra-low Latency (visually lossless video)

17ms @ 1080p60 & 4K60 4:2:0

33ms @ 4K30 4:4:4

Video Wall  
  • Up to 16 x16 display
  • Image rotation (180/270°)
  • Accurate frame gap compensation
  • Tearing free
USB USB 2.0 over IP (KVM): Supports KVM over IP: USB 2.0 host or device signal extension and routing  
Analogue Formats Stereo 2-channel  
Analogue-to-digital conversion 24-bit 48 KHz  
Digital-to-analogue conversion 24-bit 48KHz  
Serial/RS232 Bi-directional device control and monitoring  
Dante™/AES67 24-bit 48KHz  
Analogue Output Volume Adjustment   -80 to +20 dB
Certificate Compliance CE/FCC/C-tick, RoHS, WEEE  
Cooling Convection/no fan (no moving parts)  
Operating Temperature 0~40°C  
Operating Humidity 10~90% RH (non condensing)  
Heat Dissipation 41 BTU/hr  
Acoustic Noise 0 dBA